水下电池耐压与密封设计Subsea Battery: Pressure and Sealing Design

发布时间:2026-11-05Published: 2026-11-05 阅读量:Views: — 约 7 分钟阅读7 分钟 read 技术文章 · SUBSEATech Article · SUBSEA

先把压力算清楚Start with the Pressure Math

海水每下潜 10 米约增加 0.1MPa(1bar)。1000 米约 10MPa,3000 米约 30MPa,6000 米接近 60MPa——相当于每平方厘米压上 600 公斤。所有耐压设计、密封与结构强度都从这个数字出发。Every 10 m of seawater adds ~0.1 MPa (1 bar). 1,000 m ≈ 10 MPa, 3,000 m ≈ 30 MPa, 6,000 m ≈ 60 MPa — about 600 kg per cm². Every pressure, seal and structural decision starts here.

两条技术路线Two Design Routes

密封细节决定成败Sealing Details Decide Everything

热与自放电:水下的隐形杀手Heat and Self-Discharge: The Silent Killers

验证:三重测试Validation: Three Tests

弘柏交付:129.6V/25Ah 耐压圆柱组用于水下仪器;36V/100Ah 潜航器电池;44.4V/750Ah 分段式海底 UPS,支撑连续 30 天水下供电。HONGBAI deliveries: 129.6V/25Ah pressure-rated cylindrical packs for subsea instruments; 36V/100Ah AUV packs; 44.4V/750Ah sectional seabed UPS for 30-day missions.

← 返回知识专区← Back to Knowledge