PACK ENGINEERING

PACK 深度定制 · 从电芯到系统Deep PACK Customization · From Cell to System

12V–1500V 全电压平台,覆盖三元 / 磷酸铁锂 / 低温电芯,围绕您的电气接口、结构边界与工况环境,交钥匙式交付。Full 12V–1500V platform covering NCM / LiFePO4 / low-temperature cells — turnkey delivery built around your electrical interfaces, structure envelope and working environment.

本页框架已就绪,定制案例与细节内容持续补充中Page framework ready — customization cases being added

WORKFLOW

五步交钥匙流程5-Step Turnkey Workflow

需求定义Requirement Definition

电压 / 容量 / 倍率 / 尺寸包络 / 通讯协议 / 工作环境,输出《技术需求书》。Voltage, capacity, C-rate, dimension envelope, communication protocol and environment — captured in a Requirement Spec.

方案设计与仿真Design & Simulation

电芯选型、串并联结构、BMS 策略、热管理与机械仿真,3 个工作日内出初版方案。Cell selection, S/P architecture, BMS strategy, thermal and mechanical simulation; first proposal within 3 working days.

样机试制与验证Prototype & Validation

循环寿命、高低温、振动、防水与整机负载测试,提供完整测试报告。Cycle life, temperature, vibration, waterproofing and full-load tests with a complete report.

小批量试产Pilot Batch

产线固化、老化筛选与出厂全检,客户端实机验证。Process hardening, aging screening, 100% outgoing inspection and field verification.

批量交付与售后Mass Production & Service

批次追溯、备品方案与远程 BMS 数据支持,快速响应更换与检修。Batch traceability, spare planning and remote BMS data support.

电池组功能配置标注

标准功能配置Standard Feature Set

便携手提 · 电量显示灯 · LED 照明 · 双 USB · 12V 直流输出 · 多模式 LED 开关(常亮 / 快闪 / 爆闪)Portable handle · Charge indicator LEDs · LED lamp · Dual USB · 12V DC output · Multi-mode lamp (steady / strobe / SOS)

可定制维度速览Customization Matrix

电芯体系Cell chemistryNCM · LiFePO4 · 魔力低温电芯low-temp cells · 18650/21700/26650/方形prismatic
电压平台Voltage12V — 1500V(1S–200+S) (1S–200+S)
外壳工艺HousingPVC热缩shrink · 钣金sheet metal · 不锈钢stainless · 碳钢防爆carbon-steel Ex · 防水箱waterproof · 亚克力acrylic · 铝制开模/3D打印Al tooling/3D print
通讯协议Comm.RS485 · CAN · RS232 · 蓝牙Bluetooth · SMBUS
接头Connectors安德森Anderson · XT · 航空插头aviation · 防爆接头Ex-proof · 储能端子ESS terminal
保护Protection短路/过充/过放/过流/温度保护、均衡SC / OVC / OD / OC / OT + balancing
温度Temperature放电Disch. -40~60℃ · 充电Chg. -20~45℃
选件OptionsLCD/数显display · 低温加热heater · 吊环lifting rings · 弱电开关signal switch · AC220V逆变输出inverter output · 并机工作parallel operation

SELECTION GUIDE

先定电芯,再定 Pack:选型对照表Cell First, Then PACK: The Selection Matrix

软包 / 方形 / 圆柱 × 磷酸铁锂 / 三元 / 钛酸锂 / 半固态 —— 12 组组合的能量密度、循环寿命、低温、倍率、成本档位、工艺风险与出口管制注意项,已整理成一页可查的对照表。Pouch / prismatic / cylindrical × LiFePO₄ / NCM / LTO / hybrid solid-liquid — twelve combinations compared on energy density, cycle life, cold performance, C-rate, cost tier, process risk and export-control exposure.

打开电芯选型对照表Open the Cell Selection Matrix 含低温与倍率专项incl. cold & rate 含 2026-11 成本档位incl. Nov 2026 cost tiers 含 ≥300Wh/kg 出口管制提示incl. ≥300 Wh/kg export-control note